Back Purging Basic Welding Requirements Fabrication

Back Purging Basic Welding Requirements Fabrication is a welding technique that produces a layered effect. It is done by sending the arc through alternating bands of high and low voltage. The most common application is to create contrasting effects on the surface of the weld. This can be used to enhance the appearance of the […]
Back Purging – How and Why

The back purge is a method of purging that involves using the fingers to push material into the rectum. For the most part, the act is accomplished with one hand, while the other hand holds open or stretches open the individual’s anal opening. The one foot up off of the ground and squatting down may […]
Hyperbaric welding

High-pressure welding, or hyperbaric welding, was first used by the welding industry in the 1940s. It has enabled welding of dissimilar metals at high pressures, divers welding underwater without coming up for air, and welding films of films on films using magnetic fields. Hyperbaric welding is essentially welding that is done in an oxygen-free environment […]
Introduction to Destructive Weld Testing

Destructive weld testing is a method of weld inspection that involves removing the weld and examining it for defects. It can be used on any weld but is usually utilized in conjunction with non-destructive methods such as radiography and magnetic particle inspection (MPI). However, MPI cannot detect slag inclusions or porosity from inside weld beads. […]
The flux coating is made of Calcium Carbonate and Sodium.

The welding process typically requires the welding equipment ratings to be appropriate for the welding to take place. The welding equipment reviews should also provide ample information about the welding equipment. When welding, it is important that the welding project is well planned out to ensure that it is completed successfully. Just like when welding […]
5 Types of Tests for Welder Performance Qualification

There are many types of welding tests that welders need to go through before qualifying for welding positions. * Welding Process Test: This welding test is conducted to show the welding ability of the candidate in welding on various materials. The welding process test may be conducted using a welding machine or with electrodes around […]
Tools to Back Purge a TIG weld.

Why Do I Need to Back Purge My Pipe Or Tube? You have probably seen videos online showing how easy it is to back purge a pipe or tube. They show someone holding their hand over the open end of the pipe or tube they are going to back purge. Then they blow into the […]
Steps to Back Purge a TIG Weld.

TIG welding has long been used in manufacturing and the automotive industry for its ability to produce high-quality, consistent results. But what does it mean to back purge a TIG weld? With so many variations of this technique, we thought we’d break them down and take a look at the steps you need to take […]
Is it Possible to Pass or Fail a Weld Test?

There are three primary types of weld tests: free-hand, guided, and penetrant. A free-hand weld test is where the inspector looks at the weld with a microscope or through an optical device that magnifies it. This can be performed on both projection type and continuous welding processes. A projection welding process creates the bead by […]
A quick guide to welding mistakes and how to avoid them.

If you are welding for the first time or are looking to improve your welding skills, this is a great place to start! – welding mistakes and how to avoid them – welding accidents are common – welding for the first time or improving skills – a great place to start! Why welding coupons? If […]