7 DIY Maintenance Tips for Commercial Refrigeration

#1. Change Freon Level

The commercial refrigeration repair company will need to change the Freon level of commercial refrigerators after time, whether it is commercial side-by-side or commercial upright. A commercial refrigerator with a commercial ice maker can be refilled with commercial ice and water, but they will also need to make sure the commercial cooling coils are clean.

– R134a for commercial refrigeration systems

– They should turn off or unplug the compressor before changing the Freon level in commercial refrigerators that use R134a.

– Any freon leaks can be found by using an electronic leak detector.

#2. Clean Ducts and Vents

Commercial ductwork is often used to clean commercial refrigeration system vents. They can be easily accessible, which makes commercial ductwork very efficient at commercial refrigerator repair. No matter what commercial side-by-side or commercial upright is being used in the commercial kitchen, commercial restaurant, commercial bar area, or any other commercial food service establishment; if it has a thin commercial wall behind it that opens up to commercial ducts and vents, then there will be an opportunity for someone to clean them with ease.

#3. Replace Coils

Commercial refrigerators that sit inside of the units but are on top of the units use coils underneath them. These commercial refrigerator coils can get thin so they will need to be replaced after time with commercial ice makers and water dispensers in place on commercial refrigerators.

#4. Adjust Temperature Controls

Commercial beverage coolers and commercial freezers will need to be adjusted, depending on commercial beverage cooler repair or commercial freezer repair that is needed at the commercial establishment they are being used in. If someone needs commercial freezer repair or commercial refrigerator repair , then it is best to consult with a commercial refrigeration company for commercial refrigeration system repairs.

#5. Inspect Thermostats

All commercial refrigerators will have multiple thermostats in place within them, which makes commercial refrigerator repairs easier when a commercial ice maker or water dispenser becomes faulty or stops working altogether. A person can inspect the thermostat by using a multimeter with a thermocouple attachment if they want to check for commercial freezer repair and commercial refrigerator repair anywhere commercial refrigerators are used.

#6. Inspect the Doors

Even commercial freezers with commercial ice makers will need to be inspected for their commercial doors that open up into commercial food service establishments. If someone needs commercial freezer door repair , then they should inspect them as well as commercial side-by-side and commercial upright refrigerator doors without commercial icemakers inside of them.

#7. Check Commercial Cords

Commercial cords can get worn out just like any other cord, so they will need to be checked every once in a while to see if it is time for commercial appliance repair or commercial restaurant equipment repair . If someone is unsure about how to check them, then they should call a professional who can check commercial freezer repair and commercial refrigerator repair anywhere the commercial refrigeration unit is being used.

To learn more about commercial refrigeration, please visit: https://en.wikipedia.org/wiki/Refrigeration